Publications

Books:

A. M. Maniatty, G. S. Cargill III, and H. Zhang, "Modeling, Simulation, and X-Ray Microbeam Studies," Chapter 3 in Electromigration in Thin Films and Electronic Devices: Materials and Reliability , edited by Choong-Un Kim, Woodhead Publishing, 2011.

Proceedings of the Eighth Inverse Problems in Engineering Seminar, Antoinette M. Maniatty, editor, Rensselaer Polytechnic Institute, Troy, NY, 1997.

 

Journal Articles:

J. D. Hochhalter, D. J. Littlewood, M. G. Veilleux, J. E. Bozek, A. M. Maniatty, A. D. Rollett, and A. R. Ingraffea, "A geometric approach to modeling microstructurally small fatigue crack formation: III. Development of a semi-empirical model for nucleation." Modell. Simul. Mater. Sci. Eng., vol. 19, 035008 (27pp), 2011.

H. Zhang, G. S. Cargill III, and A. M. Maniatty, "Thermal strains in passivated aluminum and copper conductor lines." J. Mat. Res. , vol. 26, 633-639, 2011.

A. M. Maniatty, G. S. Cargill III, Laura E. Moyer, and Chia-Ju Yang, "Investigation of thermal stress variability due to microstructure in thin aluminum films." Journal of Applied Mechanics , vol. 78, 011012-1-9, 2011.

T. Irisawa, G. S. Cargill III, K. J. Hwang, and A. M. Maniatty, "Viscous elongation of glass rods: Experiments, Simulation, and Analysis." J. Appl. Phys. , vol. 108, 113515, 2010.

J. D. Hochhalter, D. J. Littlewood, R. J. Christ Jr., M. G. Veilleux, J. E. Bozek, A. R. Ingraffea, and A. M. Maniatty, "A geometric approach to modeling microstructurally small fatigue crack formation, part II: simulation and prediction of crack nucleation in AA 7075-T651." Modelling and Simulation in Materials Science and Engineering , vol. 18, 045004, 2010.

Karel Matous and Antoinette M. Maniatty, "Multiscale modeling of elasto-viscoplastic polycrystals subjected to finite deformations." Interaction and Multiscale Mechanics , vol. 2, 375-396, 2009.

Eunyoung Park and Antoinette M. Maniatty,"Finite element formulation for shear modulus reconstruction in transient elastography." Inverse Problems in Science and Engineering, vol. 17, 605 - 626, 2009.

Hongqing Zhang, G. Slade Cargill III, Youzhang Ge, Antoinette M. Maniatty, and W. Liu, "Strain evolution in Al conductor lines during electromigration." Journal of Applied Physics, vol. 104, 123533, 2008.

J. E. Bozek, J. D. Hochhalter, M. G. Veilleux, M. Liu, G. Heber, S. D. Sintay, A. D. Rollett, D. J. Littlewood, A. M. Maniatty, H. Weiland, R. J. Christ Jr., J. Payne, G. Welsh, D. G. Harlow, P. A. Wawrzynek, and A. R. Ingraffea, "A geometric approach to modeling microstructurally small fatigue crack formation, part I: probabilistic simulation of constituent particle cracking in AA 7075-T651." Modelling and Simulation in Materials Science and Engineering, vol. 16, 065007, 2008.

Antoinette M. Maniatty, David J. Littlewood, and Jing Lu, "Polycrystal simulations investigating the effect of additional slip system availability in a 6063 aluminum alloy at elevated temperatures." Journal of Engineering Materials and Technology, vol. 130, 021019-1-9, 2008.

Park, E. and Maniatty, A.M., "Shear modulus reconstruction in dynamic elastography: Time harmonic case." Physics in Medicine and Biology , vol. 51, 3697-3721, 2006.

Picu, R.C., Vincze, G., Ozturk, F., Gracio, J.J., Barlat, F., and Maniatty, A.M., "Strain rate sensitivity of the commercial aluminum alloy AA5182-O." Materials Science and Engineering A, vol. 390, 334-343, 2005.

Ramesh, B. and Maniatty, A.M., "Stabilized finite element formulation for finite elastic-plastic deformations." Computer Methods in Applied Mechanics and Engineering, vol. 194, 775-800, 2005.

Matous, K. and Maniatty, A.M., "Finite element formulation for modeling large deformations in elasto-viscoplastic polycrystals." International Journal for Numerical Methods in Engineering, vol. 60, 2312-2333, 2004.

Maniatty, A.M. and Liu, Y., "Stabilized finite element method for viscoplastic flow: Formulation with state variable evolution." International Journal for Numerical Methods in Engineering, vol. 56, 185-209, 2003.

Maniatty, A.M., Liu, Y., Klaas, O., and Shephard, M.S., "Higher Order Stabilized Finite Element Method for Hyperelastic Finite Deformation." Computer Methods in Applied Mechanics and Engineering, vol. 191, 1491-1503, 2002.

Kalan, R.J. and Maniatty, A.M., "Micromechanical Based Constitutive Relations for Modeling the Bulk Growth of Single Crystal InP." Journal of Crystal Growth, vol. 233, 645-659, 2001.

Maniatty, A.M., Liu, Y., Klaas, O. and Shephard, M.S., "Stabilized Finite Element Method for Viscoplastic Flow: Formulation and a Simple Progressive Solution Strategy." Computer Methods in Applied Mechanics and Engineering, vol. 190, 4609-4625, 2001.

Liu, Y., Maniatty, A.M. and Antes, H., "Investigation of a Zienkiewicz- Pande Yield Surface and an Elastic-Viscoplastic Boundary Element Formulation." Engineering Analysis with Boundary Elements, vol. 24, 207-211, 2000.

Klaas, O., Maniatty, A.M. and Shephard, M.S., "A Stabilized Mixed Petrov- Galerkin Finite Element Method for Finite Elasticity. Formulation for Linear Displacement and Pressure Interpolation." Computer Methods in Applied Mechanics and Engineering, vol. 180, 65-79, 1999.

Hinge, K.C., Maniatty, A.M., Chen, M. and Craig, K., "Axial Velocity Distribution Imparted on Thin Media Transported by Layered Rolls." International Journal of Mechanical Sciences, vol. 41, 1233-1251, 1999.

Maniatty, A.M., Yu, J.-S. and Keane, T.E. "Anisotropic Yield Criterion for Polycrystalline Metals Using Texture and Crystal Symmetries." International Journal of Solids and Structures, vol. 36, 5331-5355, 1999.

Hinge, K.C. and Maniatty, A.M., "Model of Steady Rolling Contact between Layered Rolls with Thin Media in the Nip." Engineering Computations, vol. 15, No. 7, 956-976, 1998.

Chung, H., Si, W., Dudley, M., Anselmo, A., Bliss, D., Kalan, R., Maniatty, A., Zhang, H. and Prasad, V., "Characterization of Defect Structures in Magnetic Encapsulated Kyropoulos Grown InP Single Crystals." Journal of Crystal Growth, vol. 181, 17-25, 1997.

Chung, H., Dudley, M., Anselmo, A.P., Bliss, D.F., Maniatty, A., Zhang, H., and Prasad, V., "Characterization of Structural Defects in MLEK Grown InP Single Crystals Using Synchotron White Beam X- Ray Topography." Journal of Crystal Growth, vol. 174, 230-237, 1997.

Yu, J.-S., Maniatty, A.M., and Knorr, D.B., "Model for Predicting Thermal Stresses in Thin Polycrystalline Films." Journal of the Mechanics and Physics of Solids, vol. 45, no. 4, 511-534, 1997.

Maniatty, A.M. and Chen, M.-F., "Shape Sensitivity Analysis for Steady Metal Forming Processes." International Journal for Numerical Methods in Engineering, vol. 39, no. 7, 1199-1217, 1996.

Hinge, K.C. and Maniatty, A.M., "Effect of Skew Angle on the Axial Pressure Distribution between Flexible Rubber-Covered Rollers." International Journal of Mechanical Sciences, vol. 38, no. 6, 607-619, 1996.

Maniatty, A.M. and Yu, J.-S., "Effect of Elasticity on Slip System Activity in FCC Crystals: a Numerical Study." International Journal of Solids and Structures, vol. 33, no. 8, 1069-1082, 1996.

Maniatty, A.M., "Predicting Residual Stresses in Steady-State Forming Processes." Computer Systems in Engineering, vol. 5, no. 2, 171-177, 1994.

Maniatty, A.M. and Zabaras, N.J. "Investigation of Regularization Parameters and Error Estimating in Inverse Elasticity Problems." International Journal for Numerical Methods in Engineering, vol. 37, 1039-1052, 1994.

Morgan, J., Karig, D., and Maniatty, A.M., "The Estimation of Diffuse Strains in the Toe of the Western Nankai Accretionary Prism: A Kinematic Solution." Journal of Geophysical Research, Solid Earth Volume, vol. 99, no. B4, 7019-7032, 1994.

Maniatty, A.M., Dawson, P.R., and Lee, Y-S., "A Time Integration Algorithm for Elasto-Viscoplastic Cubic Crystals Applied to Modeling Polycrystalline Deformation." International Journal for Numerical Methods in Engineering, vol. 35, 1565-1588, 1992.

Maniatty, A.M., Dawson, P.R., and Weber, G.G., "An Eulerian Elasto- Viscoplastic Formulation for Modeling Steady-State Forming Processes." International Journal of Mechanical Sciences, vol. 33, no. 5, 361-377, 1991.

Maniatty, A.M. and Zabaras, N.J., "Method for Solving Inverse Elastoviscoplastic Problems." Journal of Engineering Mechanics, ASCE, vol. 115, no. 10, 2216-2231, 1989.

Maniatty, A.M., Zabaras, N.J., and Stelson, K., "Finite Element Analysis of Some Inverse Elasticity Problems." Journal of Engineering Mechanics, ASCE, vol. 115, no. 6, 1303-1317, 1989.

Fox, R.T., Maniatty, A.M., and Lee, D., "Determination of Friction Coefficient for Sheet Materials Under Stretch Forming Conditions." Metallurgical Transactions A, vol. 20A, 2179-2182, 1989.

 

Student Dissertations and Theses:

Devin Pyle, A Comparison of Two Methods for FEM Simulations of Discrete Polycrystals, M.S. Thesis, December, 2009.

Jing Lu, Simulating Microstructure Evolution of Realistic 3D Aluminum Al loy Polycrystals during Large Plastic Deformation at Elevated Temperatures, Ph.D. Disertation, December, 2006.

Eunyoung Park, Reconstructing Shear Modulus in Tissue Using Finite Element Based Inverse Methods, Ph.D. Dissertation, May, 2006.

Chia-Ju Yang, Modeling Electromigration and Stress Driven Diffusion in Thin Metallic Films, Ph.D. Dissertation, August, 2004.

Christopher Clutz, An Investigation of the Linear Boundary Inverse Problem Using Adaptive, Global Trial Function Spaces, Ph.D. Dissertation, December, 2003.

Binoj Ramesh, A Stabilized Finite Element Formulation for the Design of Forming Processes, Ph.D. Dissertation, August, 2003.

Damon Burnett, Model for Dynamic Strain Aging in an Al-Mg Crystal, M.S. Thesis, December, 2002.

Jing Lu, Constitutive Model for Passivated Copper Polycrystal line Thin Films, M.S. Thesis, May, 2002.

Robert J. Kalan, Modeling Thermal Stresses and Defects in Single Crystal InP Grown from the Melt, Ph.D. Dissertation, May, 2001.

Binoj Ramesh, Genetic Algorithms Applied to the Optimization of Forming Processes, M.S. Thesis, May, 1999.

Thomas Keane, Development and Implementation of an Anisotropic Yield Criterion for Polycrystalline Metals, M. S. Thesis, August 1997.

Ming Ting Wu, Modeling Thermal Stresses and Defects in Thin Metallic Films, M. S. Thesis, December, 1997.

Kathleen Hinge, On the Velocity Distribution along a Thin Sheet between Steady Rolling, Flexible, Skewed, Rubber-Layered Cylinders, Ph. D. Dissertation, December 1996.

Jiun-Shya Yu, Analysis of Local Thermal Stresses Developed in Thin Polycrystalline Films Deposited on Semiconductor Substrates Using a Microstructural Based Model, Ph. D. Dissertation, May 1996.

Ming-Fa Chen, Numerical Solution of Inverse and Optimization Problems for the Design of Steady Forming Processes, Ph. D. Dissertation, December 1995.

James Papa, The Effects of Modelization Error on the Solution of Inverse Elasticity Problems, M. S. Thesis, May 1994.